molybdenum rod molybdenum bar specifications: 1) diameter: 0.5mm-60mm 2) purity of molybdenum rod>99.5% 3) impurity of total no more than 0.10mm, and the element of each no more than 0.01mm 4) applications range: used for electrodes, lead wire supporter, side rod and electronic tube, applied for manufacturing components in heater element. it can also be used as electronic tube's lattice. molybdenum slice and molybdenum sheet specifications: 1) thickness: 0.1-10mm 2) width: 50-200mm 3) applications range: used in making electric internal furnace, heating-insulated screen, electronics, electronic-vacuum and illumination, etc. molybdenum tube and molybdenum pipe: specifications: 1) outside diameter: 3.0mm to 380 mm 2) length: max 1000 mm 3) wall thickness: min 0.5 mm 4) purity of molybdenum tube>=99.95% 5) tolerance of dimensions: ±0.5mm molybdenum powder: 1) grade and purity：fmo-1: mo>=99.5%; fmo-2: mo>=99.5% ; fmo-3: mo>=99% 2) granularity and oxygen content: granularity(um) <=2 2-3 3-6 oxygen content (% not above) 0.4 0.25 0.2 3) impurity content: all the impurity cannot reach 1%, including fe, cu, ni, ca, si, al, etc. 4) application: be widely used in molybdenum sheet raw materials, molybdenum top, molybdenum alloy additive, etc. molybdenum crucible 1. specification of tungsten and molybdenum crucible: diameter of 10-400mm length of 10-6000mm wall thickness: 0.5 - 15 mm 2. the tungsten crucible and molybdenum crucible are pure tungsten or pure molybdenum materials. 3. usage: the tungsten crucible and molybdenum crucible can all be the container for rare earth smelting.